KNX  KNX Interface

KNX bus is widely used for home and building control applications. The KNX interface module is used to connect the Energy Meter to KNX bus. The power supply comes directly from the bus, so that only the bus wiring (a standard twisted pair) must be connected. The interface is provided with an ETS3 application program, in order to allow for the configuration of the communication. ETS3 is the standard software for KNX system configuration. All the active and reactive energy, voltage, current, active, reactive, apparent power, power factor, frequency registers available on the measuring instrument can be transmitted over the bus. Transmission modes available are “on request” and “automatic”, based on an adjustable energy account increment (for instance a message every 10 KWh).
Status bytes are available as well, containing information about the status of the Energy Meter and the load (type, running tariff, energy import or export and so on). Commands can be sent via the bus to the interface for resetting the energy accounts.
  • Configuration via ETS3
  • Energy registers transmitted as float values (EIS9)
  • Suitable for both single phase and three phase Energy Meters
  • Power supply from the bus
  • Standard KNX interface connection




© Herholdt Controls srl - Via Mestre 13 - 20132 Milano Italy - P.IVA 07482370157